Remote BMW

From Bavarian Technic

Revision as of 06:47, 5 February 2009 by Foklop (Talk | contribs)
Jump to: navigation, search

BMW Remote Key Intialization

  1. Upon entering the vehicle, all 4 doors should be unlocked. This can be done by pressing the central locking button.
  2. Insert one key in the ignition and turn ignition on for no more than 5 sec.
  3. Immediately turn off the ignition and remove the key.
  4. Holding the unlock button, press the lock button consecutively 3 times, then release all the buttons.
  5. All the locks should cycle, giving confirmation that the intialization was successful.
  6. Repeat step 3 to intialize the other remotes for the vehicle, a confirmation will also occur for each individual key intialized.

  • Note: All of the vehicles remotes will need to be intialized at this time. The remotes that aren't intialized at this time will be inoperative, the key is still able to start the vehicle, but remote functions will cease.
Personal tools