MS43

From Bavarian Technic

Jump to: navigation, search

Contents

MS430DS0

BMW Digital motor electronics MS43

Communications

MS430DS0 uses the DS2 over K-line at 9600 protocol and is located at bus address 0x12

Supported Features

  • Identification
  • Fault Codes
  • Erase Fault Codes
  • Shadow Fault Codes
  • Actual Values
  • Activations
  • Commands

Activations

MS430DS0 supports the following activations:
  • Injector valve cylinder 1
    • Warning: Activation test cannot be stopped once started!
  • Injector valve cylinder 2
  • Injector valve cylinder 3
  • Injector valve cylinder 4
  • Injector valve cylinder 5
  • Injector valve cylinder 6
  • Air conditioning relay
  • Fuel pump relay
  • Idle speed control valve
  • Exhaust flap
  • DISA
  • MIL

Commands

MS430DS0 supports the following commands:
  • Adaptation irregular running
  • Adaptation closing-time clearing
  • Adaptation height correction clearing
  • Adaptation throttle valve clearing
  • Adaptation lambda clearing
  • Adaptation idle-speed fluid control clearing
  • Adaptation knock control clearing
  • Adaptation variants clearing

Please refer to the commands page for detailed info.

Personal tools